Code:
[ 18.284]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 18.284] X Protocol Version 11, Revision 0
[ 18.284] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[ 18.284] Current Operating System: Linux ProBook 2.6.35.10mykernel #1 SMP Wed Feb 2 18:54:21 CET 2011 x86_64
[ 18.284] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35.10mykernel root=UUID=31fa5ec7-2d48-4b41-b46c-4d96b926f1db ro quiet splash
[ 18.284] Build Date: 09 January 2011 12:14:27PM
[ 18.284] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
[ 18.284] Current version of pixman: 0.18.4
[ 18.284] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.284] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.284] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 5 21:18:39 2011
[ 18.299] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.299] (==) No Layout section. Using the first Screen section.
[ 18.299] (==) No screen section available. Using defaults.
[ 18.299] (**) |-->Screen "Default Screen Section" (0)
[ 18.299] (**) | |-->Monitor "<default monitor>"
[ 18.299] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.299] (==) Automatically adding devices
[ 18.299] (==) Automatically enabling devices
[ 18.299] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.299] Entry deleted from font path.
[ 18.299] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 18.299] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 18.299] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.299] (II) Loader magic: 0x7d17a0
[ 18.299] (II) Module ABI versions:
[ 18.299] X.Org ANSI C Emulation: 0.4
[ 18.299] X.Org Video Driver: 8.0
[ 18.299] X.Org XInput driver : 11.0
[ 18.299] X.Org Server Extension : 4.0
[ 18.300] (--) PCI:*(0:0:2:0) 8086:0046:103c:149b rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003030/8
[ 18.300] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.300] (II) LoadModule: "extmod"
[ 18.312] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.312] (II) Module extmod: vendor="X.Org Foundation"
[ 18.312] compiled for 1.9.0, module version = 1.0.0
[ 18.312] Module class: X.Org Server Extension
[ 18.312] ABI class: X.Org Server Extension, version 4.0
[ 18.312] (II) Loading extension MIT-SCREEN-SAVER
[ 18.312] (II) Loading extension XFree86-VidModeExtension
[ 18.312] (II) Loading extension XFree86-DGA
[ 18.312] (II) Loading extension DPMS
[ 18.312] (II) Loading extension XVideo
[ 18.312] (II) Loading extension XVideo-MotionCompensation
[ 18.312] (II) Loading extension X-Resource
[ 18.312] (II) LoadModule: "dbe"
[ 18.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.312] (II) Module dbe: vendor="X.Org Foundation"
[ 18.312] compiled for 1.9.0, module version = 1.0.0
[ 18.312] Module class: X.Org Server Extension
[ 18.312] ABI class: X.Org Server Extension, version 4.0
[ 18.312] (II) Loading extension DOUBLE-BUFFER
[ 18.312] (II) LoadModule: "glx"
[ 18.312] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.312] (II) Module glx: vendor="X.Org Foundation"
[ 18.312] compiled for 1.9.0, module version = 1.0.0
[ 18.312] ABI class: X.Org Server Extension, version 4.0
[ 18.312] (==) AIGLX enabled
[ 18.313] (II) Loading extension GLX
[ 18.313] (II) LoadModule: "record"
[ 18.313] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.313] (II) Module record: vendor="X.Org Foundation"
[ 18.313] compiled for 1.9.0, module version = 1.13.0
[ 18.313] Module class: X.Org Server Extension
[ 18.313] ABI class: X.Org Server Extension, version 4.0
[ 18.313] (II) Loading extension RECORD
[ 18.313] (II) LoadModule: "dri"
[ 18.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.313] (II) Module dri: vendor="X.Org Foundation"
[ 18.313] compiled for 1.9.0, module version = 1.0.0
[ 18.313] ABI class: X.Org Server Extension, version 4.0
[ 18.313] (II) Loading extension XFree86-DRI
[ 18.313] (II) LoadModule: "dri2"
[ 18.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.314] (II) Module dri2: vendor="X.Org Foundation"
[ 18.314] compiled for 1.9.0, module version = 1.2.0
[ 18.314] ABI class: X.Org Server Extension, version 4.0
[ 18.314] (II) Loading extension DRI2
[ 18.314] (==) Matched intel as autoconfigured driver 0
[ 18.314] (==) Matched vesa as autoconfigured driver 1
[ 18.314] (==) Matched fbdev as autoconfigured driver 2
[ 18.314] (==) Assigned the driver to the xf86ConfigLayout
[ 18.314] (II) LoadModule: "intel"
[ 18.314] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.314] (II) Module intel: vendor="X.Org Foundation"
[ 18.314] compiled for 1.9.0, module version = 2.12.0
[ 18.314] Module class: X.Org Video Driver
[ 18.314] ABI class: X.Org Video Driver, version 8.0
[ 18.314] (II) LoadModule: "vesa"
[ 18.314] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.314] (II) Module vesa: vendor="X.Org Foundation"
[ 18.314] compiled for 1.8.99.905, module version = 2.3.0
[ 18.314] Module class: X.Org Video Driver
[ 18.314] ABI class: X.Org Video Driver, version 8.0
[ 18.314] (II) LoadModule: "fbdev"
[ 18.314] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.314] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.314] compiled for 1.8.99.905, module version = 0.4.2
[ 18.314] ABI class: X.Org Video Driver, version 8.0
[ 18.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 18.315] (II) VESA: driver for VESA chipsets: vesa
[ 18.315] (II) FBDEV: driver for framebuffer: fbdev
[ 18.315] (++) using VT number 7
[ 18.315] (WW) Falling back to old probe method for vesa
[ 18.315] (WW) Falling back to old probe method for fbdev
[ 18.315] (II) Loading sub module "fbdevhw"
[ 18.315] (II) LoadModule: "fbdevhw"
[ 18.315] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.315] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.315] compiled for 1.9.0, module version = 0.0.2
[ 18.315] ABI class: X.Org Video Driver, version 8.0
[ 18.316] drmOpenDevice: node name is /dev/dri/card0
[ 18.317] drmOpenDevice: open result is 9, (OK)
[ 18.317] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.317] drmOpenDevice: node name is /dev/dri/card0
[ 18.317] drmOpenDevice: open result is 9, (OK)
[ 18.317] drmOpenByBusid: drmOpenMinor returns 9
[ 18.317] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.317] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.317] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.317] (==) intel(0): RGB weight 888
[ 18.317] (==) intel(0): Default visual is TrueColor
[ 18.317] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 18.317] (--) intel(0): Chipset: "Arrandale"
[ 18.317] (==) intel(0): video overlay key set to 0x101fe
[ 18.334] (II) intel(0): Output VGA1 has no monitor section
[ 18.334] (II) intel(0): Output LVDS1 has no monitor section
[ 18.334] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 18.335] (II) intel(0): Output DP1 has no monitor section
[ 18.344] (II) intel(0): Output HDMI1 has no monitor section
[ 18.345] (II) intel(0): Output DP2 has no monitor section
[ 18.362] (II) intel(0): EDID for output VGA1
[ 18.362] (II) intel(0): EDID for output LVDS1
[ 18.362] (II) intel(0): Manufacturer: SEC Model: 3155 Serial#: 0
[ 18.362] (II) intel(0): Year: 2009 Week: 0
[ 18.362] (II) intel(0): EDID Version: 1.3
[ 18.362] (II) intel(0): Digital Display Input
[ 18.362] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 19
[ 18.362] (II) intel(0): Gamma: 2.20
[ 18.362] (II) intel(0): No DPMS capabilities specified
[ 18.362] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.362] (II) intel(0): First detailed timing is preferred mode
[ 18.362] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 18.362] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 18.362] (II) intel(0): Manufacturer's mask: 0
[ 18.362] (II) intel(0): Supported detailed timing:
[ 18.362] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 165 mm
[ 18.362] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 18.362] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 18.362] (II) intel(0): Unknown vendor-specific block f
[ 18.362] (II) intel(0): SAMSUNG
[ 18.362] (II) intel(0): 133AT16-301
[ 18.362] (II) intel(0): EDID (in hex):
[ 18.362] (II) intel(0): 00ffffffffffff004ca3553100000000
[ 18.362] (II) intel(0): 00130103801f13780a87f594574f8c27
[ 18.362] (II) intel(0): 27505400000001010101010101010101
[ 18.362] (II) intel(0): 010101010101121b567250000c303020
[ 18.362] (II) intel(0): 250025a5100000190000000f00000000
[ 18.362] (II) intel(0): 00000000002387026400000000fe0053
[ 18.362] (II) intel(0): 414d53554e470a2020202020000000fe
[ 18.362] (II) intel(0): 00313333415431362d3330310a2000b8
[ 18.363] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 18.363] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 18.363] (II) intel(0): Printing probed modes for output LVDS1
[ 18.363] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.363] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.363] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 18.363] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.363] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.363] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.363] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.364] (II) intel(0): EDID for output DP1
[ 18.373] (II) intel(0): EDID for output HDMI1
[ 18.374] (II) intel(0): EDID for output DP2
[ 18.374] (II) intel(0): Output VGA1 disconnected
[ 18.374] (II) intel(0): Output LVDS1 connected
[ 18.374] (II) intel(0): Output DP1 disconnected
[ 18.374] (II) intel(0): Output HDMI1 disconnected
[ 18.374] (II) intel(0): Output DP2 disconnected
[ 18.374] (II) intel(0): Using exact sizes for initial modes
[ 18.374] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 18.374] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.374] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[ 18.374] (==) intel(0): DPI set to (96, 96)
[ 18.374] (II) Loading sub module "fb"
[ 18.374] (II) LoadModule: "fb"
[ 18.374] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.375] (II) Module fb: vendor="X.Org Foundation"
[ 18.375] compiled for 1.9.0, module version = 1.0.0
[ 18.375] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.375] (II) UnloadModule: "vesa"
[ 18.375] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.375] (II) UnloadModule: "fbdev"
[ 18.375] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.375] (II) UnloadModule: "fbdevhw"
[ 18.375] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.375] (==) Depth 24 pixmap format is 32 bpp
[ 18.375] (II) intel(0): [DRI2] Setup complete
[ 18.375] (II) intel(0): [DRI2] DRI driver: i965
[ 18.375] (**) intel(0): Tiling enabled
[ 18.375] (**) intel(0): SwapBuffers wait enabled
[ 18.375] (==) intel(0): VideoRam: 262144 KB
[ 18.375] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 18.381] (II) UXA(0): Driver registered support for the following operations:
[ 18.381] (II) solid
[ 18.381] (II) copy
[ 18.381] (II) composite (RENDER acceleration)
[ 18.381] (II) put_image
[ 18.381] (II) get_image
[ 18.381] (==) intel(0): Backing store disabled
[ 18.381] (==) intel(0): Silken mouse enabled
[ 18.381] (II) intel(0): Initializing HW Cursor
[ 18.415] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.416] (==) intel(0): DPMS enabled
[ 18.416] (==) intel(0): Intel XvMC decoder enabled
[ 18.416] (II) intel(0): Set up textured video
[ 18.416] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 18.417] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.417] (--) RandR disabled
[ 18.417] (II) Initializing built-in extension Generic Event Extension
[ 18.417] (II) Initializing built-in extension SHAPE
[ 18.417] (II) Initializing built-in extension MIT-SHM
[ 18.417] (II) Initializing built-in extension XInputExtension
[ 18.417] (II) Initializing built-in extension XTEST
[ 18.417] (II) Initializing built-in extension BIG-REQUESTS
[ 18.417] (II) Initializing built-in extension SYNC
[ 18.417] (II) Initializing built-in extension XKEYBOARD
[ 18.417] (II) Initializing built-in extension XC-MISC
[ 18.417] (II) Initializing built-in extension SECURITY
[ 18.417] (II) Initializing built-in extension XINERAMA
[ 18.417] (II) Initializing built-in extension XFIXES
[ 18.417] (II) Initializing built-in extension RENDER
[ 18.417] (II) Initializing built-in extension RANDR
[ 18.417] (II) Initializing built-in extension COMPOSITE
[ 18.417] (II) Initializing built-in extension DAMAGE
[ 18.417] (II) Initializing built-in extension GESTURE
[ 18.423] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.423] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.423] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.423] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 18.423] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.424] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 18.424] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.424] (II) intel(0): Setting screen physical size to 361 x 203
[ 18.436] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 18.442] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.442] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.442] (II) LoadModule: "evdev"
[ 18.442] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.442] (II) Module evdev: vendor="X.Org Foundation"
[ 18.442] compiled for 1.9.0, module version = 2.3.2
[ 18.442] Module class: X.Org XInput Driver
[ 18.442] ABI class: X.Org XInput driver, version 11.0
[ 18.442] (**) Power Button: always reports core events
[ 18.442] (**) Power Button: Device: "/dev/input/event2"
[ 18.448] (II) Power Button: Found keys
[ 18.448] (II) Power Button: Configuring as keyboard
[ 18.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.448] (**) Option "xkb_rules" "evdev"
[ 18.448] (**) Option "xkb_model" "evdev"
[ 18.448] (**) Option "xkb_layout" "it"
[ 18.449] (II) XKB: reuse xkmfile /var/lib/xkb/server-35DF0DEC488035CD7337E5EF69F018BFAFADCAC5.xkm
[ 18.450] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 18.450] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 18.450] (**) Video Bus: always reports core events
[ 18.450] (**) Video Bus: Device: "/dev/input/event10"
[ 18.456] (II) Video Bus: Found keys
[ 18.456] (II) Video Bus: Configuring as keyboard
[ 18.456] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 18.456] (**) Option "xkb_rules" "evdev"
[ 18.456] (**) Option "xkb_model" "evdev"
[ 18.456] (**) Option "xkb_layout" "it"
[ 18.457] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 18.457] (II) No input driver/identifier specified (ignoring)
[ 18.457] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 18.457] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 18.457] (**) Sleep Button: always reports core events
[ 18.457] (**) Sleep Button: Device: "/dev/input/event0"
[ 18.464] (II) Sleep Button: Found keys
[ 18.464] (II) Sleep Button: Configuring as keyboard
[ 18.464] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 18.464] (**) Option "xkb_rules" "evdev"
[ 18.464] (**) Option "xkb_model" "evdev"
[ 18.464] (**) Option "xkb_layout" "it"
[ 18.465] (II) config/udev: Adding input device HP Webcam [2 MP Fixed] (/dev/input/event4)
[ 18.465] (**) HP Webcam [2 MP Fixed]: Applying InputClass "evdev keyboard catchall"
[ 18.465] (**) HP Webcam [2 MP Fixed]: always reports core events
[ 18.465] (**) HP Webcam [2 MP Fixed]: Device: "/dev/input/event4"
[ 18.472] (II) HP Webcam [2 MP Fixed]: Found keys
[ 18.472] (II) HP Webcam [2 MP Fixed]: Configuring as keyboard
[ 18.472] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Fixed]" (type: KEYBOARD)
[ 18.472] (**) Option "xkb_rules" "evdev"
[ 18.472] (**) Option "xkb_model" "evdev"
[ 18.472] (**) Option "xkb_layout" "it"
[ 18.472] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event8)
[ 18.472] (II) No input driver/identifier specified (ignoring)
[ 18.473] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event9)
[ 18.473] (II) No input driver/identifier specified (ignoring)
[ 18.474] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 18.474] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.474] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.474] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 18.480] (II) AT Translated Set 2 keyboard: Found keys
[ 18.480] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.480] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.480] (**) Option "xkb_rules" "evdev"
[ 18.480] (**) Option "xkb_model" "evdev"
[ 18.480] (**) Option "xkb_layout" "it"
[ 18.480] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 18.480] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 18.480] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 18.480] (II) LoadModule: "synaptics"
[ 18.480] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 18.480] (II) Module synaptics: vendor="X.Org Foundation"
[ 18.481] compiled for 1.9.0, module version = 1.2.2
[ 18.481] Module class: X.Org XInput Driver
[ 18.481] ABI class: X.Org XInput driver, version 11.0
[ 18.481] (II) Synaptics touchpad driver version 1.2.2
[ 18.481] (**) Option "Device" "/dev/input/event7"
[ 18.513] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5590
[ 18.513] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4686
[ 18.513] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 18.513] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 18.513] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 18.549] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 18.549] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 18.565] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 18.565] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 18.565] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 18.565] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 18.565] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 18.589] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 18.589] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 18.589] (II) No input driver/identifier specified (ignoring)
[ 18.589] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 18.589] (II) No input driver/identifier specified (ignoring)
[ 18.589] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 18.589] (II) No input driver/identifier specified (ignoring)
[ 18.591] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[ 18.591] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.591] (**) HP WMI hotkeys: always reports core events
[ 18.591] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[ 18.597] (II) HP WMI hotkeys: Found keys
[ 18.597] (II) HP WMI hotkeys: Configuring as keyboard
[ 18.597] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 18.597] (**) Option "xkb_rules" "evdev"
[ 18.597] (**) Option "xkb_model" "evdev"
[ 18.597] (**) Option "xkb_layout" "it"
[ 18.790] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 18.790] (II) intel(0): Printing DDC gathered Modelines:
[ 18.790] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.820] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 18.820] (II) intel(0): Printing DDC gathered Modelines:
[ 18.820] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.866] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 18.866] (II) intel(0): Printing DDC gathered Modelines:
[ 18.866] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 18.895] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 18.895] (II) intel(0): Printing DDC gathered Modelines:
[ 18.895] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 19.292] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 19.292] (II) intel(0): Printing DDC gathered Modelines:
[ 19.292] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.615] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 25.615] (II) intel(0): Printing DDC gathered Modelines:
[ 25.615] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.645] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 25.645] (II) intel(0): Printing DDC gathered Modelines:
[ 25.645] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.675] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 25.675] (II) intel(0): Printing DDC gathered Modelines:
[ 25.675] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.704] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 25.704] (II) intel(0): Printing DDC gathered Modelines:
[ 25.704] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 25.780] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 25.780] (II) intel(0): Printing DDC gathered Modelines:
[ 25.780] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.127] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 26.127] (II) intel(0): Printing DDC gathered Modelines:
[ 26.127] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 30.967] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 30.967] (II) intel(0): Printing DDC gathered Modelines:
[ 30.967] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 411.140] (II) intel(0): EDID vendor "SEC", prod id 12629
[ 411.140] (II) intel(0): Printing DDC gathered Modelines:
[ 411.140] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
Is it correct? If I have the vesa driver, how can i enable the correct driver of the intel graphic card?
Bookmarks