Code:
[ 0.772288] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
[ 0.772288] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
[ 0.772288] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
[ 0.772288] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.772288] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
[ 0.772288] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[ 0.772290] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.808402] pnp: PnP ACPI: found 10 devices
[ 0.808406] ACPI: ACPI bus type pnp unregistered
[ 0.812102] PCI: Using ACPI for IRQ routing
[ 0.812102] pci 0000:00:04.0: BAR 7: can't allocate resource
[ 0.812102] pci 0000:00:04.0: BAR 8: can't allocate resource
[ 0.812102] pci 0000:00:04.0: BAR 9: can't allocate resource
[ 0.812102] pci 0000:00:05.0: BAR 7: can't allocate resource
[ 0.812102] pci 0000:00:05.0: BAR 8: can't allocate resource
[ 0.824066] NET: Registered protocol family 8
[ 0.824068] NET: Registered protocol family 20
[ 0.828056] NetLabel: Initializing
[ 0.828058] NetLabel: domain hash size = 128
[ 0.828060] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.828078] NetLabel: unlabeled traffic allowed by default
[ 0.829717] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.829721] actual entries 65586
[ 0.829884] AppArmor: AppArmor Filesystem Enabled
[ 0.829915] ACPI: RTC can wake from S4
[ 0.840075] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.840079] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.840094] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.840099] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.840107] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.847100] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.847100] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.847100] pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
[ 0.847100] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.847100] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.847100] pci 0000:00:04.0: IO window: disabled
[ 0.847100] pci 0000:00:04.0: MEM window: disabled
[ 0.847100] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.847100] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[ 0.847100] pci 0000:00:05.0: IO window: disabled
[ 0.847100] pci 0000:00:05.0: MEM window: disabled
[ 0.847100] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.847100] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[ 0.847100] pci 0000:06:04.0: IO window: 0x00a400-0x00a4ff
[ 0.847100] pci 0000:06:04.0: IO window: 0x00a800-0x00a8ff
[ 0.847100] pci 0000:06:04.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.847100] pci 0000:06:04.0: MEM window: 0x58000000-0x5bffffff
[ 0.847100] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
[ 0.847100] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 0.847100] pci 0000:00:14.4: MEM window: 0xf0300000-0xf03fffff
[ 0.847100] pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff
[ 0.847100] pci 0000:00:04.0: setting latency timer to 64
[ 0.847100] pci 0000:00:05.0: setting latency timer to 64
[ 0.847100] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.847100] bus: 00 index 0 io port: [0, ffff]
[ 0.847100] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.847100] bus: 01 index 0 io port: [9000, 9fff]
[ 0.847100] bus: 01 index 1 mmio: [f0200000, f02fffff]
[ 0.847100] bus: 01 index 2 mmio: [d0000000, dfffffff]
[ 0.847100] bus: 01 index 3 mmio: [0, 0]
[ 0.847100] bus: 02 index 0 mmio: [0, fff]
[ 0.847100] bus: 02 index 1 mmio: [0, fffff]
[ 0.847100] bus: 02 index 2 mmio: [0, fffff]
[ 0.847100] bus: 02 index 3 mmio: [0, 0]
[ 0.847100] bus: 04 index 0 mmio: [0, fff]
[ 0.847100] bus: 04 index 1 mmio: [0, fffff]
[ 0.847100] bus: 04 index 2 mmio: [0, 0]
[ 0.847100] bus: 04 index 3 mmio: [0, 0]
[ 0.847100] bus: 06 index 0 io port: [a000, afff]
[ 0.847100] bus: 06 index 1 mmio: [f0300000, f03fffff]
[ 0.847100] bus: 06 index 2 mmio: [50000000, 53ffffff]
[ 0.847100] bus: 06 index 3 io port: [0, ffff]
[ 0.847100] bus: 06 index 4 mmio: [0, ffffffffffffffff]
[ 0.847100] bus: 07 index 0 io port: [a400, a4ff]
[ 0.847100] bus: 07 index 1 io port: [a800, a8ff]
[ 0.847100] bus: 07 index 2 mmio: [50000000, 53ffffff]
[ 0.847100] bus: 07 index 3 mmio: [58000000, 5bffffff]
[ 0.847100] NET: Registered protocol family 2
[ 0.852063] Switched to high resolution mode on CPU 0
[ 0.852095] Switched to high resolution mode on CPU 1
[ 0.885147] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.885815] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.887110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.887705] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.887708] TCP reno registered
[ 0.897149] NET: Registered protocol family 1
[ 0.897300] checking if image is initramfs... it is
[ 1.907004] Freeing initrd memory: 9120k freed
[ 1.914602] audit: initializing netlink socket (disabled)
[ 1.914621] type=2000 audit(1226611670.912:1): initialized
[ 1.921603] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.925962] VFS: Disk quotas dquot_6.5.1
[ 1.926111] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.926271] msgmni has been set to 1494
[ 1.926462] io scheduler noop registered
[ 1.926464] io scheduler anticipatory registered
[ 1.926467] io scheduler deadline registered
[ 1.926675] io scheduler cfq registered (default)
[ 1.926686] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 1.926774] pci 0000:01:05.0: Boot video device
[ 1.926953] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.926977] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.926981] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.927066] pci_express 0000:00:04.0:pcie02: allocate port service
[ 1.927174] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.927195] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.927199] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.927276] pci_express 0000:00:05.0:pcie02: allocate port service
[ 1.991975] Linux agpgart interface v0.103
[ 1.991983] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.995964] brd: module loaded
[ 1.996108] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.996306] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.996768] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.996863] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.996875] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.996878] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.996881] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.996883] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.016368] mice: PS/2 mouse device common for all mice
[ 2.016631] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.016664] rtc0: alarms up to one month
[ 2.016745] cpuidle: using governor ladder
[ 2.016747] cpuidle: using governor menu
[ 2.017207] TCP cubic registered
[ 2.017621] registered taskstats version 1
[ 2.017808] Magic number: 0:163:500
[ 2.017981] rtc_cmos 00:04: setting system clock to 2008-11-13 21:27:51 UTC (1226611671)
[ 2.017985] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.017987] EDD information not available.
[ 2.018054] Freeing unused kernel memory: 536k freed
[ 2.018368] Write protecting the kernel read-only data: 4348k
[ 2.019130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.172263] fuse init (API version 7.9)
[ 2.364124] ACPI: processor limited to max C-state 1
[ 2.364258] processor ACPI0007:00: registered as cooling_device0
[ 2.364379] processor ACPI0007:01: registered as cooling_device1
[ 2.430330] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.489604] ACPI: Thermal Zone [THRM] (47 C)
[ 2.845131] No dock devices found.
[ 2.885695] usbcore: registered new interface driver usbfs
[ 2.885726] usbcore: registered new interface driver hub
[ 2.892032] usbcore: registered new device driver usb
[ 2.913798] SCSI subsystem initialized
[ 2.917582] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.917605] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.917677] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 2.917754] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0406000
[ 2.922295] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.928102] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.928312] usb usb1: configuration #1 chosen from 1 choice
[ 2.928347] hub 1-0:1.0: USB hub found
[ 2.928358] hub 1-0:1.0: 8 ports detected
[ 2.956742] libata version 3.00 loaded.
[ 2.959790] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.032703] pata_acpi 0000:00:12.0: enabling device (0005 -> 0007)
[ 3.032717] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.032847] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.032872] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.032937] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 3.032961] ohci_hcd 0000:00:13.0: irq 19, io mem 0xf0404000
[ 3.089448] usb usb2: configuration #1 chosen from 1 choice
[ 3.089488] hub 2-0:1.0: USB hub found
[ 3.089503] hub 2-0:1.0: 4 ports detected
[ 3.193606] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.193629] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.193676] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 3.193701] ohci_hcd 0000:00:13.1: irq 19, io mem 0xf0405000
[ 3.249300] usb usb3: configuration #1 chosen from 1 choice
[ 3.249336] hub 3-0:1.0: USB hub found
[ 3.249350] hub 3-0:1.0: 4 ports detected
[ 3.354344] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.354393] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 3.354729] 8139cp 0000:06:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 3.354779] 8139cp 0000:06:01.0: Try the "8139too" driver instead.
[ 3.362213] sata_sil 0000:00:12.0: version 2.3
[ 3.365556] scsi0 : sata_sil
[ 3.365695] 8139too Fast Ethernet driver 0.9.28
[ 3.367644] scsi1 : sata_sil
[ 3.368209] ata1: SATA max UDMA/100 mmio m512@0xf0407000 tf 0xf0407080 irq 22
[ 3.368215] ata2: SATA max UDMA/100 mmio m512@0xf0407000 tf 0xf04070c0 irq 22
[ 3.688098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.698208] ata1.00: ATA-7: ST98823AS, 3.06, max UDMA/133
[ 3.698213] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.712986] ata1.00: configured for UDMA/100
[ 4.032085] ata2: SATA link down (SStatus 0 SControl 310)
[ 4.032159] isa bounce pool size: 16 pages
[ 4.032268] scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.06 PQ: 0 ANSI: 5
[ 4.033148] scsi2 : pata_atiixp
[ 4.033285] scsi3 : pata_atiixp
[ 4.784469] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 4.784475] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 4.948738] ata3.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.20, max UDMA/33
[ 4.964685] ata3.00: configured for UDMA/33
[ 5.123026] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.20 PQ: 0 ANSI: 5
[ 5.123469] 8139too 0000:06:01.0: power state changed by ACPI to D0
[ 5.123487] 8139too 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.124779] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:67:2a:54, IRQ 21
[ 5.124781] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.138154] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.138212] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 5.161231] Driver 'sr' needs updating - please use bus_type methods
[ 5.166437] Driver 'sd' needs updating - please use bus_type methods
[ 5.166714] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.166747] sd 0:0:0:0: [sda] Write Protect is off
[ 5.166750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.166802] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.166919] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.166946] sd 0:0:0:0: [sda] Write Protect is off
[ 5.166949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.167040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.167045] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.169554] Uniform CD-ROM driver Revision: 3.20
[ 5.169698] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.248173] sda1 sda2 sda3
[ 5.266038] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.669433] PM: Starting manual resume from disk
[ 5.669438] PM: Resume from partition 8:3
[ 5.669440] PM: Checking hibernation image.
[ 5.669684] PM: Resume from disk failed.
[ 5.712465] kjournald starting. Commit interval 5 seconds
[ 5.712489] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.464197] udevd version 124 started
[ 14.808218] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.836156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.952101] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 14.981047] ACPI: Power Button (FF) [PWRF]
[ 14.981185] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 14.981313] ACPI: Lid Switch [LID]
[ 14.981382] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 15.013087] ACPI: Power Button (CM) [PWRB]
[ 15.013234] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 15.041048] ACPI: Sleep Button (CM) [SLPB]
[ 15.041454] ACPI: WMI: Mapper loaded
[ 15.104907] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.198236] [fglrx] Maximum main memory to use for locked dma buffers: 670 MBytes.
[ 15.198293] [fglrx] vendor: 1002 device: 5975 count: 1
[ 15.199130] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 15.199155] pci 0000:01:05.0: power state changed by ACPI to D0
[ 15.199169] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.200208] [fglrx] PAT is enabled successfully!
[ 15.200257] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 15.252328] ACPI: AC Adapter [ACAD] (on-line)
[ 15.809603] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[ 15.832892] ACPI: Battery Slot [BAT1] (battery present)
[ 15.846445] acpi device:27: registered as cooling_device2
[ 15.846997] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:24/device:25/input/input6
[ 15.868081] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.868127] proc_dir_entry 'video/VGA' already registered
[ 15.868133] Pid: 2535, comm: modprobe Tainted: P 2.6.27-7-generic #1
[ 15.868136]
[ 15.868136] Call Trace:
[ 15.868147] [<ffffffff8033dea8>] proc_register+0x1e8/0x220
[ 15.868151] [<ffffffff8033e102>] proc_mkdir_mode+0x42/0x60
[ 15.868155] [<ffffffff8033e136>] proc_mkdir+0x16/0x20
[ 15.868163] [<ffffffffa03d0e99>] acpi_video_bus_add_fs+0x2d/0x199 [video]
[ 15.868168] [<ffffffffa03d2251>] acpi_video_bus_add+0xe8/0x2f7 [video]
[ 15.868182] [<ffffffff803ee550>] acpi_device_probe+0x4e/0x91
[ 15.868188] [<ffffffff80430552>] really_probe+0x72/0x1a0
[ 15.868193] [<ffffffff804306d0>] driver_probe_device+0x50/0x60
[ 15.868197] [<ffffffff8043076b>] __driver_attach+0x8b/0x90
[ 15.868201] [<ffffffff804306e0>] ? __driver_attach+0x0/0x90
[ 15.868204] [<ffffffff8042fcdb>] bus_for_each_dev+0x6b/0xa0
[ 15.868209] [<ffffffff802e1ecb>] ? kmem_cache_alloc+0x8b/0xd0
[ 15.868214] [<ffffffffa0081000>] ? acpi_video_init+0x0/0x63 [video]
[ 15.868218] [<ffffffff804303b1>] driver_attach+0x21/0x30
[ 15.868221] [<ffffffff8042f548>] bus_add_driver+0x1f8/0x270
[ 15.868226] [<ffffffffa0081000>] ? acpi_video_init+0x0/0x63 [video]
[ 15.868230] [<ffffffff80430965>] driver_register+0x75/0x170
[ 15.868235] [<ffffffffa0081000>] ? acpi_video_init+0x0/0x63 [video]
[ 15.868239] [<ffffffff803ee8a6>] acpi_bus_register_driver+0x43/0x45
[ 15.868244] [<ffffffffa0081041>] acpi_video_init+0x41/0x63 [video]
[ 15.868248] [<ffffffff8020a041>] do_one_initcall+0x41/0x170
[ 15.868253] [<ffffffff8026c261>] ? __blocking_notifier_call_chain+0x21/0x90
[ 15.868258] [<ffffffff8027d085>] sys_init_module+0xb5/0x1f0
[ 15.868264] [<ffffffff8021285a>] system_call_fastpath+0x16/0x1b
[ 15.868266]
[ 15.879473] acpi device:2c: registered as cooling_device3
[ 15.879861] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:29/device:2a/input/input7
[ 15.889032] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 16.056526] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 16.082675] sdhci: Secure Digital Host Controller Interface driver
[ 16.082680] sdhci: Copyright(c) Pierre Ossman
[ 16.090493] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[ 16.090523] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 16.090651] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[ 16.090673] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[ 16.090688] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[ 16.090694] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 16.090747] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 16.126780] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[ 16.126812] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 16.126815] Yenta: Routing CardBus interrupts to PCI
[ 16.126822] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[ 16.128089] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 16.154454] wlan: 0.9.4
[ 16.349698] ath_pci: 0.9.4
[ 16.358273] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 16.358280] Socket status: 30000006
[ 16.358285] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 16.358290] pcmcia: parent PCI bridge Memory window: 0xf0300000 - 0xf03fffff
[ 16.358293] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 16.361167] ath_pci 0000:06:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.702059] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 16.733674] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 17.086736] ath_rate_sample: 1.2 (0.9.4)
[ 17.127085] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 17.129128] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 17.129137] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 17.129148] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 17.129153] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 17.129161] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 17.129163] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 17.129165] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 17.129167] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 17.129170] wifi0: Use hw queue 8 for CAB traffic
[ 17.129171] wifi0: Use hw queue 9 for beacons
[ 17.134838] wifi0: Atheros 5212: mem=0xf0310000, irq=22
[ 17.356597] Registered led device: acer-wmi::mail
[ 17.489801] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.485079] lp: driver loaded but no devices found
[ 19.796269] Adding 1333384k swap on /dev/sda3. Priority:-1 extents:1 across:1333384k
[ 20.231086] EXT3 FS on sda1, internal journal
[ 20.878820] type=1505 audit(1226611690.616:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4206
[ 21.088273] type=1505 audit(1226611690.828:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4211
[ 21.088564] type=1505 audit(1226611690.828:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4211
[ 21.275561] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.081944] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (2 cpu cores) (version 2.20.00)
[ 22.082033] powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
[ 22.082038] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
[ 22.082041] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
[ 23.774048] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 24.310490] ppdev: user-space parallel port driver
[ 24.849063] Clocksource tsc unstable (delta = -186944099 ns)
[ 30.352485] Bluetooth: Core ver 2.13
[ 30.356257] NET: Registered protocol family 31
[ 30.356272] Bluetooth: HCI device and connection manager initialized
[ 30.356283] Bluetooth: HCI socket layer initialized
[ 30.414733] Bluetooth: L2CAP ver 2.11
[ 30.414764] Bluetooth: L2CAP socket layer initialized
[ 30.490196] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.490229] Bluetooth: SCO socket layer initialized
[ 30.550589] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.550605] Bluetooth: BNEP filters: protocol multicast
[ 30.582172] Bluetooth: RFCOMM socket layer initialized
[ 30.585238] Bluetooth: RFCOMM TTY layer initialized
[ 30.585264] Bluetooth: RFCOMM ver 1.10
[ 30.621503] Bridge firewalling registered
[ 30.623784] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 34.373078] [fglrx] GART Table is not in FRAME_BUFFER range
[ 34.380304] [fglrx] CMM init INV FB MC:0x38000000, length:0x8000000
[ 34.380327] [fglrx] Reserved FB block: Shared offset:0, size:40000
[ 34.812629] eth0: link down
[ 34.893692] NET: Registered protocol family 17
[ 42.210446] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 84.941797] NET: Registered protocol family 10
[ 84.944137] lo: Disabled Privacy Extensions
[ 84.945843] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 88.798474] CPU0 attaching NULL sched-domain.
[ 88.798516] CPU1 attaching NULL sched-domain.
[ 88.816194] CPU0 attaching sched-domain:
[ 88.816207] domain 0: span 0-1 level CPU
[ 88.816213] groups: 0 1
[ 88.816226] domain 1: span 0-1 level NODE
[ 88.816231] groups: 0-1
[ 88.816240] CPU1 attaching sched-domain:
[ 88.816244] domain 0: span 0-1 level CPU
[ 88.816248] groups: 1 0
[ 88.816255] domain 1: span 0-1 level NODE
[ 88.816259] groups: 0-1
[ 95.037043] ath0: no IPv6 routers present
[ 545.261368] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 545.261389] ata3.00: ST_FIRST: !(DRQ|ERR|DF)
[ 545.261407] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 545.261410] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 545.261414] res 50/50:50:50:50:50/00:00:00:00:00/50 Emask 0x2 (HSM violation)
[ 545.261422] ata3.00: status: { DRDY }
[ 545.261470] ata3: soft resetting link
[ 545.417326] ata3.00: NODEV after polling detection
[ 545.417343] ata3.00: revalidation failed (errno=-2)
[ 550.417112] ata3: soft resetting link
[ 550.572331] ata3.00: NODEV after polling detection
[ 550.572348] ata3.00: revalidation failed (errno=-2)
[ 555.572135] ata3: soft resetting link
[ 555.752738] ata3.00: configured for UDMA/33
[ 555.752803] ata3: EH complete
[ 3616.265351] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3616.265371] ata3.00: ST_FIRST: !(DRQ|ERR|DF)
[ 3616.265388] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 3616.265391] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3616.265395] res 50/50:50:50:50:50/00:00:00:00:00/50 Emask 0x2 (HSM violation)
[ 3616.265403] ata3.00: status: { DRDY }
[ 3616.265452] ata3: soft resetting link
[ 3616.420375] ata3.00: NODEV after polling detection
[ 3616.420391] ata3.00: revalidation failed (errno=-2)
[ 3621.421116] ata3: soft resetting link
[ 3621.600742] ata3.00: configured for UDMA/33
[ 3621.600803] ata3: EH complete
[ 4310.265385] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 4310.265405] ata3.00: ST_FIRST: !(DRQ|ERR|DF)
[ 4310.265424] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 4310.265427] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 4310.265430] res 50/50:50:50:50:50/00:00:00:00:00/50 Emask 0x2 (HSM violation)
[ 4310.265439] ata3.00: status: { DRDY }
[ 4310.265487] ata3: soft resetting link
[ 4310.421322] ata3.00: NODEV after polling detection
[ 4310.421338] ata3.00: revalidation failed (errno=-2)
[ 4315.420113] ata3: soft resetting link
[ 4315.601793] ata3.00: configured for UDMA/33
[ 4315.601860] ata3: EH complete
[ 7064.264360] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7064.264379] ata3.00: ST_FIRST: !(DRQ|ERR|DF)
[ 7064.264396] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 7064.264399] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7064.264403] res 50/50:50:50:50:50/00:00:00:00:00/50 Emask 0x2 (HSM violation)
[ 7064.264411] ata3.00: status: { DRDY }
[ 7064.264457] ata3: soft resetting link
[ 7064.421322] ata3.00: NODEV after polling detection
[ 7064.421339] ata3.00: revalidation failed (errno=-2)
[ 7069.420124] ata3: soft resetting link
[ 7069.577333] ata3.00: NODEV after polling detection
[ 7069.577350] ata3.00: revalidation failed (errno=-2)
[ 7074.576112] ata3: soft resetting link
[ 7074.733328] ata3.00: NODEV after polling detection
[ 7074.733345] ata3.00: revalidation failed (errno=-2)
[ 7074.733354] ata3.00: disabled
[ 7074.733427] ata3: soft resetting link
[ 7074.889180] ata3: EH complete
[19157.872109] usb 1-1: new high speed USB device using ehci_hcd and address 2
[19158.114620] usb 1-1: configuration #1 chosen from 1 choice
[19158.546707] usbcore: registered new interface driver libusual
[19158.596598] Initializing USB Mass Storage driver...
[19158.599272] scsi4 : SCSI emulation for USB Mass Storage devices
[19158.602058] usb-storage: device found at 2
[19158.602078] usb-storage: waiting for device to settle before scanning
[19158.602093] usbcore: registered new interface driver usb-storage
[19158.608853] USB Mass Storage support registered.
[19163.600549] usb-storage: device scan complete
[19163.602430] scsi 4:0:0:0: Direct-Access Lexar JD Secure II + 1100 PQ: 0 ANSI: 0 CCS
[19164.916562] sd 4:0:0:0: [sdb] 7831552 512-byte hardware sectors (4010 MB)
[19164.920585] sd 4:0:0:0: [sdb] Write Protect is off
[19164.920603] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[19164.920610] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[19164.931954] sd 4:0:0:0: [sdb] 7831552 512-byte hardware sectors (4010 MB)
[19164.933965] sd 4:0:0:0: [sdb] Write Protect is off
[19164.933986] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[19164.933993] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[19164.935111] sdb: sdb1
[19164.937564] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[19164.940037] sd 4:0:0:0: Attached scsi generic sg2 type 0
[19563.873185] usb 1-1: USB disconnect, address 2
jim@jim-laptop:~$
Bookmarks